Showing posts with label beetlejail entrance trap. Show all posts
Showing posts with label beetlejail entrance trap. Show all posts

Friday, October 26, 2012

Beetlejail Entrance Trap - continued

bee, beekeeping, beetlejail entrance trap, Small Hive Beetle, ventilation,
bee, beekeeping, beetlejail entrance trap, Small Hive Beetle, ventilation,

I  removed the window screen which was used to exclude small hive beetles (SHB) entering the top of the hive.  As you can see, the bees propolized the screen which does not fit my winter ventilation plans.  Another downside is that palmetto bugs resided unchallenged between the cover and inner cover.  Compare the two pictures - the bottom hive side looks food safe while the top side has palmetto bug droppings - yuck.

The last clean-out of the beetlejail entrance trap was September 27th.   Today, I found zero SHB in the oil or crawling on the pull-out drawer.  I'll conclude that SHB are no longer flying.  Beneath the inner cover I discovered a few SHB - oh well.

Sunday, August 26, 2012

Beetlejail Entrance Trap

bee, beekeeping, beetlejail entrance trap, brushy mountain, pail feeder, Small Hive Beetle,
bee, beekeeping, beetlejail entrance trap, brushy mountain, pail feeder, Small Hive Beetle,
bee, beekeeping, beetlejail entrance trap, brushy mountain, pail feeder, Small Hive Beetle,
bee, beekeeping, beetlejail entrance trap, brushy mountain, pail feeder, Small Hive Beetle,

Over the winter I prepared the Beetlejail Entrance Trap for attachment to an 8 frame Brushy Mountain bottom board.  I used a foam brush for the green paint and white spray paint for the novel grooved entrance.  From the look of the bleeding white paint I should have used the expensive green FROG TAPE. Apparently, the small hive beetles (SHB) try to escape the bees by running around the grooved rectangular perimeter..  The bottom edge of the perimeter leads to a pull-out drawer which has three chambers of olive oil.  Dave Miller suggested a lure is not necessary - "the hive odor is more than sufficient as a lure" says Dave, and I have to agree.

In June I noticed the SHB corralled beneath the inverted 1 gallon pail feeder or corralled between the cover and inner cover.  On July 7th I added the Beetlejail Entrance Trap to a functioning hive, my split.   This installation was slightly tricky.  I moved the box away from landing area, then attached the trap to the existing bottom board.  The last step is to coax back the box flush with the trap.    

Esthetically the hive now has the charming (or outrageous) look of an elephant seal.  I added a rectangle of plastic window screen to the inner cover hole after I stopped feeding with an inverted pail.   The window screen prevents the SHB from entering by way of the top of the hive.  Initially the bees propolized the perimeter of the inner cover hole, now the bees have completely propolized the inner cover hole. 

Has the trap eliminated all SHB?  Probably not, but it has been a lot of fun.